Rip currents, fast offshore-directed fl ows, are the leading cause of death and rescues on surf beaches worldwide. The National Oceanic and Atmospheric Administration (NOAA) seeks to minimize this threat by providing rip-current hazard likelihood forecasts based on environmental conditions from the Nearshore Wave Prediction System. Rip currents come in several types, including bathymetric rip currents that form when waves break on sandbars interspersed with channels and transient rip currents that form when there are breaking waves coming from multiple directions. The NOAA model was developed and tested in an area where bathymetric rip currents may be the most prevalent type of rip current. Therefore, model performance in regions where other types of rip currents (e.g., transient rip currents) may be more ubiquitous remains unknown. To investigate the efficacy fi cacy of the NOAA model guidance in the context of different rip-current types, we compared modeled rip-current probabilities with physical-based parameterizations of bathymetric and transient rip-current speeds. We also compared these probabilities to lifeguard observations of bathymetric and transient rip currents from Salt Creek Beach, California, in summer and fall 2021. We found that the NOAA model skillfully predicts a wide range of hazardous parameterized bathymetric speeds but generally underpredicts hazardous transient rip-current speeds and the hazardous rip currents observed at Salt Creek Beach. Our results demonstrate how wave parameters, including directional spread, may serve as environmental indicators of rip-current hazard. By evaluating factors that influence fl uence the skill of modeled rip-current predictions, we strive toward improved rip-current hazard forecasting. SIGNIFICANCE STATEMENT: The purpose of this study is to evaluate how well the NOAA rip-current hazard model predicts different rip-current types. Accurate forecasting of rip currents is important because rip currents are the leading cause of death and rescues at surf beaches worldwide. By comparing the performance of the NOAA model to parameterized rip-current speed and lifeguard observations of rip-current strength, we highlighted the model's decreased ability to predict hazardous transient rip currents compared to hazardous bathymetric rip currents. Because bathymetric and transient rip currents are driven by different environmental conditions, an improved hazard model must be sensitive to these different conditions to predict a greater range of hazardous rip currents.

Surfzone eddies enhance the dispersion and transport of contaminants, bacteria, and larvae across the nearshore, altering coastal water quality and ecosystem health. During directionally spread wave conditions, vertical vortices (horizontal eddies) are injected near the ends of breaking crests. Energy associated with these eddies may be transferred to larger-scale, low-frequency rotational motions through an inverse energy cascade, consistent with two-dimensional turbulence. However, our understanding of the relationships between the wave conditions and the dynamics and energetics of low-frequency surfzone eddies are largely based on numerical modeling. Here, we test these relationships with remotely sensed and in situ observations from large-scale directional wave basin experiments with varying wave conditions over alongshore-uniform barred bathymetry. Surface velocities derived with particle image velocimetry were employed to assess the spatial scales of low-frequency surfzone eddies and compute structure functions with alongshore velocities. Second-order structure functions for directionally spread waves (σ_θ ≥ 10°) are consistent with energy flux to larger or smaller length scales, while normally incident, unidirectional waves do not display this behavior. Third-order structure functions suggest that the surfzone flows exhibit a bidirectional energy cascade — a direct cascade to smaller and inverse cascade to larger length scales — during large directional spreads waves (σ_θ ≥ 18°). However, there is not decisive evidence of an inverse energy cascade for moderate directional spreads (σ_θ ≥ 10°). Energy flux varies by cross-shore location and increases with increasing directional spread and wave height. Eddy decorrelation length scales weakly depend on wave directional spread. These findings advance our understanding of the dynamics linking wave breaking to large-scale rotational motions that enhance mixing and lead to rip currents, important conduits for cross-shore material exchange.

Short-crested breaking waves that result from directionally spread wave conditions dissipate energy and generate turbulence within the surf zone, altering sediment transport processes, wave runup, and forces on structures. Additionally, vertical vorticity generated near crest ends during breaking, which depends on the gradient in wave height along a crest, may enhance nearshore dispersion of pollutants, nutrients, and larvae. Although directionally spread irregular wave fields are ubiquitous on ocean and large lake coastlines, the dependence of short-crested breaking wave characteristics (including the along-crest length and number of crest ends) on offshore wave conditions is not well established. To assess this relationship, laboratory experiments with alongshore-uniform barred bathymetry were performed in a large-scale directional wave basin. A three-dimensional scanning lidar, trinocular camera stereo processing methods, and in situ measurements were used to study short-crested wave field breaking characteristics in the laboratory, yielding a dataset with dense spatio-temporal coverage relative to prior laboratory or field measurements. Wave height estimates are similar for remotely sensed and in situ observations, except in the outer surf zone where plunging breaking occurred. Directional wave properties estimated with an array of in situ or remotely sensed sea-surface elevation estimates are similar and yield smaller directional spreads than single-point colocated pressure and velocity based in situ estimates when waves are less directionally spread. Using a breaking crest identification procedure combining visible imagery and stereo sea-surface elevation, we find that the average along-crest length of breaking waves decreases and the average number of crest ends increases with increasing directional spread. Relative to observations, a parameterized relationship between directional spread and crest characteristics based on theory for non-breaking, refracting waves generally over-estimates breaking crest lengths and is similar to or underestimates the total number of crest ends observed in the surf zone. The wave-field-dependent breaking-wave characteristics examined in the laboratory with remote sensing techniques can inform future investigations of depth-limited short-crested wave breaking and resulting surfzone eddy processes.